Bladenetworks G8264 48 x SFP+ 10 Gigabit Ethernet ports + 4 x QSFP+ 40Gb Switch

Bladenetworks G8264 48 x SFP+ 10 Gigabit Ethernet ports + 4 x QSFP+ 40Gb Switch
Bladenetworks G8264 48 x SFP+ 10 Gigabit Ethernet ports + 4 x QSFP+ 40Gb Switch
Bladenetworks G8264 48 x SFP+ 10 Gigabit Ethernet ports + 4 x QSFP+ 40Gb Switch
Bladenetworks G8264 48 x SFP+ 10 Gigabit Ethernet ports + 4 x QSFP+ 40Gb Switch
Bladenetworks G8264 48 x SFP+ 10 Gigabit Ethernet ports + 4 x QSFP+ 40Gb Switch
Bladenetworks G8264 48 x SFP+ 10 Gigabit Ethernet ports + 4 x QSFP+ 40Gb Switch

Bladenetworks G8264 48 x SFP+ 10 Gigabit Ethernet ports + 4 x QSFP+ 40Gb Switch

BladeNetworks Rack Switch G8264, BAF-00044-00 The feature-rich Blade RackSwitch G8264 includes 48 x SFP+ 10 Gigabit Ethernet (GbE) ports plus 4 x QSFP+ 40 GbE ports in a flexible 1U switch. The SFP+ ports support SFP 1 GbE if needed, while the four QSFP+ ports can add up to 16 additional SFP+ ports via breakout cables.

Redundant power supplies and cooling fans come standard, adding to the reliability and efficiency. In addition the G8264 supports stacking for up to eight switches for simplified switch management using a single IP management address.

Key features The RackSwitch G8264 is considered particularly suited for the following environments: The G8264 supports several types of configurations: 1 GbE, 10 GbE, 40 GbE, vNIC, Converged Enhanced Ethernet (CEE/DCB), NAS, and iSCSI. The G8264 with SFP+ technology is the ideal solution for clients who want low latency and low power consumption.

The G8264 supports stacking for up to eight switches by using a single switch image and configuration file that shares one IP address and one management interface for simplified management. The G8264 supports Data Center Bridging (DCB), the group of protocols from IEEE that provide lossless Ethernet and with which clients can reduce the costs of implementing the following features: NAS or iSCSI convergence and priority-based flow control FCoE by aggregating switch ports before connecting to more costly upstream Fibre Channel gateway devices - The G8264 can be configured in easy connect mode to allow for transparent and simple connectivity to the upstream network, which enables easy connectivity to upstream Cisco, Juniper, or other networks without changing those networks. On-switch VMready® software that reduces the complexity of managing virtual machines (VMs) in the network.

The G8264 is SDN ready with its OpenFlow support. With OpenFlow, you can easily create usercontrolled virtual networks, optimize performance dynamically, and minimize complexity when it is used with an OpenFlow controller. The G8264 plays a vital role with Virtual Fabric, which reduces costs and complexity in environments in which four or more NICs are needed per server. An example is virtualization, where clients often need up to eight NICs per server. Pulled from a working system.

Let me know if you have any questions. U-Boot 2009.08 (Dec 17 2010 - 06:49:11) CPU: 8536, Version: 1.2, (0x80370092) Core: E500, Version: 3.0, (0x80210030) Clock Configuration: CPU0:1500 MHz, CCB:500 MHz, DDR:250 MHz (500 MT/s data rate), LBC:31.250 MHz L1: D-cache 32 kB enabled I-cache 32 kB enabled Board: G8264 (36-bit addrmap), Version: 0.0.0.5 DRAM: 4 GB Memory Test....................

Production Mode FLASH: 32 MB L2: 512 KB enabled NAND: 2048 MiB PCIE1: Link Booting... Booting image'1' Initializing Production Mode (0.0.5.25)..... Blade Network Technologies RackSwitch G8264 NVRAM flags = 0xffffffff Completing MP initialization... Rebooted because of power cycle. Booting complete 0:01:55 Sun Jan 1, 2000: Version 6.6.100.16 from FLASH image1, factory default configuration.

Dec 31 16:01:57 0.0.0.0 INFO system: booted version 6.6.100.16 from FLASH image1, factory default configuration Blade Network Technologies RackSwitch G8264. Enter password: admin RS G8264>en Enable privilege granted.

RS G8264#show ver System Information at 16:17:45 Sat Dec 31, 2000 Time zone: America/US/Pacific Daylight Savings Time Status: Disabled Blade Network Technologies RackSwitch G8264 Switch has been up for 0 days, 0 hours, 17 minutes and 22 seconds. Last boot: 16:01:55 Sat Dec 31, 2000 (power cycle) MAC address: 08:17:f4:32:b1:00 IP (If 1) address: 0.0.0.0 Management Port MAC Address: 08:17:f4:32:b1:fe Management Port IP Address (if 128): 0.0.0.0 Hardware Revision: 0 Hardware Part No: BAC-00065-00 Switch Serial No: US7052003S Manufacturing date: 11/07 Software Version 6.6.100.16 (FLASH image1), factory default configuration. Temperature Mother Top: 21 C Temperature Mother Bottom: 28 C Temperature Daughter Top: 20 C Temperature Daughter Bottom: 27 C Warning at 75 C and Recover at 90 C Fan 1 in Module 1: RPM= 7356 PWM= 15(5%) Front-To-Back Fan 2 in Module 1: RPM= 5123 PWM= 15(5%) Front-To-Back Fan 3 in Module 2: RPM= 7616 PWM= 15(5%) Front-To-Back Fan 4 in Module 2: RPM= 5273 PWM= 15(5%) Front-To-Back Fan 5 in Module 3: RPM= 7648 PWM= 15(5%) Front-To-Back Fan 6 in Module 3: RPM= 5212 PWM= 15(5%) Front-To-Back Fan 7 in Module 4: RPM= 7616 PWM= 15(5%) Front-To-Back Fan 8 in Module 4: RPM= 5147 PWM= 15(5%) Front-To-Back System Fan Airflow: Front-To-Back Power Supply 1: OK Power Supply 2: OK Power Faults: Fan Faults: Service Faults: RS G8264# show sys-info System Information at 16:17:53 Sat Dec 31, 2000 Time zone: America/US/Pacific Daylight Savings Time Status: Disabled Blade Network Technologies RackSwitch G8264 Switch has been up for 0 days, 0 hours, 17 minutes and 30 seconds.

Temperature Mother Top: 21 C Temperature Mother Bottom: 28 C Temperature Daughter Top: 20 C Temperature Daughter Bottom: 27 C Warning at 75 C and Recover at 90 C Fan 1 in Module 1: RPM= 7366 PWM= 15(5%) Front-To-Back Fan 2 in Module 1: RPM= 5123 PWM= 15(5%) Front-To-Back Fan 3 in Module 2: RPM= 7616 PWM= 15(5%) Front-To-Back Fan 4 in Module 2: RPM= 5273 PWM= 15(5%) Front-To-Back Fan 5 in Module 3: RPM= 7648 PWM= 15(5%) Front-To-Back Fan 6 in Module 3: RPM= 5217 PWM= 15(5%) Front-To-Back Fan 7 in Module 4: RPM= 7616 PWM= 15(5%) Front-To-Back Fan 8 in Module 4: RPM= 5147 PWM= 15(5%) Front-To-Back System Fan Airflow: Front-To-Back Power Supply 1: OK Power Supply 2: OK Power Faults: Fan Faults: Service Faults: RS G8264# show system System Information at 16:17:57 Sat Dec 31, 2000 Time zone: America/US/Pacific Daylight Savings Time Status: Disabled Blade Network Technologies RackSwitch G8264 Switch has been up for 0 days, 0 hours, 17 minutes and 34 seconds. Temperature Mother Top: 21 C Temperature Mother Bottom: 28 C Temperature Daughter Top: 20 C Temperature Daughter Bottom: 27 C Warning at 75 C and Recover at 90 C Fan 1 in Module 1: RPM= 7366 PWM= 15(5%) Front-To-Back Fan 2 in Module 1: RPM= 5118 PWM= 15(5%) Front-To-Back Fan 3 in Module 2: RPM= 7616 PWM= 15(5%) Front-To-Back Fan 4 in Module 2: RPM= 5278 PWM= 15(5%) Front-To-Back Fan 5 in Module 3: RPM= 7648 PWM= 15(5%) Front-To-Back Fan 6 in Module 3: RPM= 5217 PWM= 15(5%) Front-To-Back Fan 7 in Module 4: RPM= 7627 PWM= 15(5%) Front-To-Back Fan 8 in Module 4: RPM= 5147 PWM= 15(5%) Front-To-Back System Fan Airflow: Front-To-Back Power Supply 1: OK Power Supply 2: OK Power Faults: Fan Faults: Service Faults: Current idle CLI timeout: 10 minutes Current linkscan mode: normal System will reset on crash System will log packets sent to the CPU Use of BOOTP for configuration currently enabled Use of DHCP for MGT interface configuration currently enabled Display hostname (sysName) in CLI prompt currently disabled Syslog console enabled ErrDisable recovery disabled, timeout 300 sec Port-based Port Mirroring currently disabled IP Forwarding currently ON NTP currently OFF RADIUS authentication currently OFF TACACS+ authentication currently OFF LDAP Authentication currently OFF USB inserted and ready: no Current SNMP params: Read community string: "public" Write community string: "private" SNMP state machine timeout: 5 minutes Trap source address: 0.0.0.0 Authentication traps disabled. All link up/down traps enabled. Current SNMP trap hosts: Current System Access settings: IP Management currently allowed from ALL IP addresses Usernames: user - enabled - offline oper - disabled - offline admin - Always Enabled - online 1 session.

Current User ID table: Current strong password settings: strong password status: disabled HTTP access currently enabled on TCP port 80 HTTPS server access currently disabled on TCP port 443 NETCONF access currently enabled NETCONF session timeout: 300 seconds NETCONF via SSH currently enabled on TCP port 830 SNMP access currently read-write User configuration from BBI currently disabled Telnet/SSH access configuration from BBI currently disabled Telnet access currently enabled on TCP port 23 TFTP occurs over port 69 RS G8264#. Northwest Remarketing is a leading, internationally known reseller of I.

For over 20 years now, Northwest Remarketing has provided quality, New and Used Networking, Telecom, Server, and Test equipment at substantial savings to our customers. The item "Bladenetworks G8264 48 x SFP+ 10 Gigabit Ethernet ports + 4 x QSFP+ 40Gb Switch" is in sale since Monday, June 26, 2017. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Switches & Hubs\Network Switches". The seller is "nwremarketing-rjtcbh" and is located in Salem, Oregon. This item can be shipped worldwide.


Bladenetworks G8264 48 x SFP+ 10 Gigabit Ethernet ports + 4 x QSFP+ 40Gb Switch


Index  Sitemap  Contact Form  Privacy Policies  Service Agreement