Brocade VDX 6720 Br-vdx6720-40-f 40-port 1/10 Gigabit Ethernet Network Switch

Brocade VDX 6720 Br-vdx6720-40-f 40-port 1/10 Gigabit Ethernet Network Switch
Brocade VDX 6720 Br-vdx6720-40-f 40-port 1/10 Gigabit Ethernet Network Switch
Brocade VDX 6720 Br-vdx6720-40-f 40-port 1/10 Gigabit Ethernet Network Switch
Brocade VDX 6720 Br-vdx6720-40-f 40-port 1/10 Gigabit Ethernet Network Switch
Brocade VDX 6720 Br-vdx6720-40-f 40-port 1/10 Gigabit Ethernet Network Switch

Brocade VDX 6720 Br-vdx6720-40-f 40-port 1/10 Gigabit Ethernet Network Switch
TESTING & COSMETIC NOTES: This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING The unit has been reset to the factory default settings. (1) - BROCADE VDX 6720 BR-VDX6720-40-F 40-PORT 1/10 GIGABIT ETHERNET NETWORK SWITCH 80-1006305-01 VDX6720-60 FCOE. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. U-Boot 1.1.3 (Dec 13 2011 - 22:54:31) CPU: 8548, Version: 2.1, (0x80310021) Core: E500, Version: 2.2, (0x80210022) Clock Configuration: CPU:1199 MHz, CCB: 399 MHz, DDR: 199 MHz, LBC: 49 MHz L1: D-cache 32 kB enabled I-cache 32 kB enabled Board: CallistoE CPU Board Revision 255.198 (0xffc6) PCI2: disabled I2C: ready DRAM: initdram: Initializing DDRSDRAM initdram: Normal boot in progress dimm_spd_sdram 2001: memsize = 800 initdram: Call ddr_enable_ecc dram size -2147483648 DDR: 2048 MB POST RAM test disabled. Adjusted memory 0x7d000000 2097152000 Now running in RAM - U-Boot at: 78f7e000 trap_init : 0x0 system inventory subsystem initialized FLASH: 4 MB L2 cache 512KB: enabled CPLD: Init complete ATA interface setup upm 256: ffdfc04, fffffc01, fffffc00, fffffc00 PCI: gd->brcd_flags = 0, PCI init Skip our host bridge 00 11 1657 0010 0280 1a 00 14 1131 1561 0c03 1a 00 14 1131 1562 0c03 1a 83 00 1657 001a 0280 3c 82 01 10b5 8618 0604 1a 84 00 1657 001a 0280 3d 82 02 10b5 8618 0604 1a 85 00 1657 001a 0280 3e 82 03 10b5 8618 0604 1a 86 00 1657 001a 0280 3f 82 05 10b5 8618 0604 1a 87 00 1657 001a 0280 40 82 07 10b5 8618 0604 1a 88 00 1657 001a 0280 41 82 09 10b5 8618 0604 1a 89 00 1657 001a 0280 42 82 0a 10b5 8618 0604 1a 8a 00 1657 001a 0280 43 82 0b 10b5 8618 0604 1a 8b 00 1657 001a 0280 44 82 0c 10b5 8618 0604 1a 82 0d 10b5 8618 0604 1a 82 0e 10b5 8618 0604 1a 82 0f 10b5 8618 0604 1a 81 00 10b5 8618 0604 1a In: serial Out: serial Err: serial Net: ENET0: PHY is Broadcom BCM5461S 10/100/1000 BaseT PHY (2060c1) ENET1: PHY is Broadcom BCM5241 10/100 BaseT PHY (143bc31) board_init_r: Adjusted ram 2097152000 0x7d000000 2048000k Checking system RAM - press any key to stop test Checking memory address: 00100000 System RAM test using Default POST RAM Test succeeded. Set_bootstatus: BS_LOAD_OS, platform_idx = 14 Hit ESC to stop autoboot: 0 Map file at LBA sector 0x1a803f do_bootm 171: load_addr 0x02000000 addr 0x00400000 do_bootm 174: ## Booting image at 00400000 load_addr 0x02000000... Image Name: Linux-2.6.14.2 Image Type: PowerPC Linux Multi-File Image (gzip compressed) Data Size: 2681147 Bytes = 2.6 MB Load Address: 00000000 Entry Point: 00000000 Contents: Image 0: 1604632 Bytes = 1.5 MB Image 1: 1076503 Bytes = 1 MB Uncompressing Multi-File Image... Do_bootm_linux 565: ## Current stack ends at 0x78F5CB30 => set upper limit to 0x00800000 ## initrd at 0x00587C64... 0x0068E97A (len=1076503=0x106D17) Loading Ramdisk to 1fef9000, end 1ffffd17...

OK initrd_start = 1fef9000, initrd_end = 1ffffd17 ## Transferring control to Linux (at address 00000000)... Tlbcam_index=11 mpc85xx_setup: Doing Pcie bridge setup Installing Linux 2.6 Kernel Attempting to find a root file system on hda1...

INIT: version 2.78 booting Bypassing firmware validation. INIT: Entering runlevel: 3 (none) Starting Fabric OS Services...

Callisto: setting to MASTER as HA bit is not set sys_chip_init: class 0 max 24 Done sys_chip_init: class 1 max 24 Done sysdrv_config = 0x2 VCS mode is ENABLED (VCS ID 1) VCS cluster mode is DISABLED eAnvil rev B found Starting Dcmd... Running as a Daemon : 1 Type : 0 Host Name : VDX6720-1 Host IP Address : Port : 3016 Starting Services now... Running as a Daemon : 1 Type : 0 Host Name : VDX6720-1 Host IP Address : Port : 5016 Starting Services now...

Dcmd is ready for HASM to be launched Ccmd is ready for HASM to be launched Waiting for HASM to be launched and get to a stage where DCMD can continue... HASM has been launched and now DCMD can continue processing...

HASM has been launched and now CCMD can continue processing... Sat Aug 20 00:05:18 GMT 2016 :: Triggering confd load phase1 after waiting for 5 secs max chip 23 licd_ctor : chassis(0)-dcm: Msg input: msg = RECOVER, size = 0 : chassis(0)-dcm: recovery stage : chassis(0)-dcm: stage 1002 : chassis(0)-dcm: message to be delivered to component : chassis(0)-ccm: Msg input: msg = RECOVER, size = 0 : chassis(0)-ccm: recovery stage : chassis(0)-ccm: stage 1002 : chassis(0)-ccm: message to be delivered to component : chassis(0)-dcm: Next recover (idx) stage: 1 : chassis(0)-ccm: Next recover (idx) stage: 1 : chassis(0)-dcm: Msg input: msg = RECOVER, size = 0 : chassis(0)-dcm: recovery stage : chassis(0)-dcm: stage 1 : chassis(0)-dcm: message to be delivered to component : chassis(0)-ccm: Msg input: msg = RECOVER, size = 0 : chassis(0)-ccm: recovery stage : chassis(0)-ccm: stage 1 : chassis(0)-ccm: message to be delivered to component : chassis(0)-ccm: Next recover (idx) stage: 2 : chassis(0)-dcm: Next recover (idx) stage: 2. Passed :: Dcm-Client Initialization passed from l2sys client... MCAST_SS successfully initialized as wave client SSM successfully initialized as wave client chmod: too few arguments Try `chmod --help' for more information. Eld_trace_init success Passed :: Dcm-Client Initialization passed from dauthd client... Rmon successfully initialized as wave client PCAP successfully initialized as wave client SFLOW successfully initialized as wave client INFO : Sat Aug 20 00:05:50 2016 : DcmClientInterface dcm_initialize_client_for _dual_daemons : cluster type = 1IGMP successfully initialized as wave client Passed :: Dcm-Client Initialization passed from eld client...

Eld_master_init: eld_sock_init sock 14 success Passed :: Dcm-Client Initialization passed from mstp client... Passed :: Dcm-Client Initialization passed from lacp client... Initialized DCMD: ethsw(2)-dcm: Client SuccessfMsg input: msg = RECOVER, size = 0 ully: ethsw(2)-dcm: recovery stage : ethsw(2)-dcm: stage 1002 : ethsw(2)-dcm: message to be delivered to component : ethsw(2)-ccm: Msg input: msg = RECOVER, size = 0 : ethsw(2)-ccm: recovery stage : ethsw(2)-ccm: stage 1002 : ethsw(2)-ccm: message to be delivered to component : ethsw(2)-dcm: Next recover (idx) stage: 1 : ethsw(2)-ccm: Next recover (idx) stage: 1 NSM VCS mode is enabled domain id = 0 MCT_TABLE: ethsw(2)-dcm: AVL CREATEION FMsg input: msg = RECOVER, size = 0 AILED MCT_TABL: ethsw(2)-dcm: E AVL CREATEION recovery stage SUCCESS : ethsw(2)-dcm: stage 1 : ethsw(2)-dcm: message to be delivered to component : ethsw(2)-ccm: Msg input: msg = RECOVER, size = 0 : ethsw(2)-ccm: recovery stage : ethsw(2)-ccm: stage 1 : ethsw(2)-ccm: message to be delivered to component : ethsw(2)-dcm: Next recover (idx) stage: 2 : ethsw(2)-ccm: Next recover (idx) stage: 2 : ethsw(2)-dcm: Msg input: msg = RECOVER, size = 0 : ethsw(2)-dcm: recovery stage : ethsw(2)-dcm: stage 2 : ethsw(2)-dcm: message to be delivered to component : ethsw(2)-ccm: Msg input: msg = RECOVER, size = 0 : ethsw(2)-ccm: recovery stage : ethsw(2)-ccm: stage 1001 : ethsw(2)-ccm: message to be delivered to component : ethsw(2)-dcm: Next recover (idx) stage: 5 : ethsw(2)-ccm: Next recover (idx) stage: 8 : ethsw(2)-dcm: Msg input: msg = RECOVER, size = 0 : ethsw(2)-dcm: recovery stage : ethsw(2)-dcm: no stage 3 : ethsw(2)-ccm: Msg input: msg = RECOVER, size = 0 : ethsw(2)-ccm: recovery stage : ethsw(2)-ccm: no stage 3 ki_state_set: re: ethsw(2)-dcm: dundant ACTIVATEMsg input: msg = RECOVER, size = 0 : ethsw(2)-dcm: recovery stage : ethsw(2)-dcm: no stage 4 : ethsw(2)-ccm: Msg input: msg = RECOVER, size = 0 : ethsw(2)-ccm: recovery stage : ethsw(2)-ccm: no stage 4 : ethsw(2)-dcm: Msg input: msg = RECOVER, size = 0 : ethsw(2)-dcm: recovery stage : ethsw(2)-dcm: stage 3 : ethsw(2)-dcm: message to be delivered to component : ethsw(2)-ccm: Msg input: msg = RECOVER, size = 0 : ethsw(2)-ccm: recovery stage : ethsw(2)-ccm: no stage 5 : ethsw(2)-dcm: Next recover (idx) stage: 6 : ethsw(2)-dcm: Msg input: msg = RECOVER, size = 0 : ethsw(2)-dcm: recovery stage : ethsw(2)-dcm: stage 1001 : ethsw(2)-dcm: message to be delivered to component : ethsw(2)-ccm: Msg input: msg = RECOVER, size = 0 : ethsw(2)-ccm: recovery stage : ethsw(2)-ccm: no stage 6 : ethsw(2)-dcm: Next recover (idx) stage: 8 : ethsw(2)-dcm: Msg input: msg = RECOVER, size = 0 : ethsw(2)-dcm: recovery stage : ethsw(2)-dcm: no stage 7 : ethsw(2)-ccm: Msg input: msg = RECOVER, size = 0 : ethsw(2)-ccm: recovery stage : ethsw(2)-ccm: no stage 7 2016/08/20-00:05:56, [SSMD-1300], 2376,, INFO, VDX6720-1, CEEMap _vcs_cee is cr eated with precedence 100. 2016/08/20-00:05:56, [SSMD-1303], 2377,, INFO, VDX6720-1, CEEMap _vcs_cee prior ity group 15.0 with weight 0 is created with PFC enabled. Fcsw(4)-dcm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-dcm: recovery stage : fcsw(4)-dcm: stage 1002 : fcsw(4)-dcm: message to be delivered to component : fcsw(4)-ccm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-ccm: recovery stage : fcsw(4)-ccm: stage 1002 : fcsw(4)-ccm: message to be delivered to component : fcsw(4)-dcm: Next recover (idx) stage: 1 : fcsw(4)-ccm: Next recover (idx) stage: 1 : fcsw(4)-dcm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-dcm: recovery stage : fcsw(4)-dcm: stage 1 : fcsw(4)-dcm: message to be delivered to component : fcsw(4)-ccm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-ccm: recovery stage : fcsw(4)-ccm: stage 1 : fcsw(4)-ccm: message to be delivered to component ki_state_set: re: fcsw(4)-ccm: dundant ACTIVATENext recover (idx) stage: 6 : fcsw(4)-dcm: ki_state_set: rNext recover (idx) stage: 2 edundant ACTIVATE for instance 1 : fcsw(4)-dcm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-dcm: recovery stage : fcsw(4)-dcm: stage 2 : fcsw(4)-dcm: message to be delivered to component : fcsw(4)-ccm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-ccm: recovery stage : fcsw(4)-ccm: no stage 2 : fcsw(4)-dcm: Next recover (idx) stage: 7 : fcsw(4)-dcm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-dcm: recovery stage : fcsw(4)-dcm: no stage 3 : fcsw(4)-ccm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-ccm: recovery stage : fcsw(4)-ccm: no stage 3 : fcsw(4)-dcm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-dcm: recovery stage : fcsw(4)-dcm: no stage 4 : fcsw(4)-ccm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-ccm: recovery stage : fcsw(4)-ccm: no stage 4 : fcsw(4)-dcm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-dcm: recovery stage : fcsw(4)-dcm: no stage 5 : fcsw(4)-ccm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-ccm: recovery stage : fcsw(4)-ccm: no stage 5 : fcsw(4)-dcm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-dcm: recovery stage : fcsw(4)-dcm: no stage 6 : fcsw(4)-ccm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-ccm: recovery stage : fcsw(4)-ccm: stage 1001 : fcsw(4)-ccm: message to be delivered to component : fcsw(4)-ccm: Next recover (idx) stage: 16 2016/08/20-00:06:10, [MFIC-1002], 2378,, INFO, VDX6720-1, Chassis FRU header not programmed for switch NID, using defaults (applies only to FICON environments).

2016/08/20-00:06:10, [ZONE-1046], 2379,, INFO, VDX6720-1, The Default Zone acces s mode is already set to All Access. 2016/08/20-00:06:10, [ZONE-1024], 2380,, INFO, VDX6720-1, cfgSave completes succ essfully. Fcsw(4)-dcm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-dcm: recovery stage : fcsw(4)-dcm: stage 3 : fcsw(4)-dcm: message to be delivered to component : fcsw(4)-ccm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-ccm: recovery stage : fcsw(4)-ccm: no stage 7 : fcsw(4)-dcm: Next recover (idx) stage: 8 : fcsw(4)-dcm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-dcm: recovery stage : fcsw(4)-dcm: stage 4 : fcsw(4)-dcm: message to be delivered to component : fcsw(4)-ccm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-ccm: recovery stage : fcsw(4)-ccm: no stage 8 : fcsw(4)-dcm: Next recover (idx) stage: 9 2016/08/20-00:06:13, [SNMP-1005], 2381,, INFO, VDX6720-1, SNMP configuration att ribute, SNMPv3 User Name 1, has changed from [snmpadmin1] to. 2016/08/20-00:06:13, [SNMP-1005], 2382,, INFO, VDX6720-1, SNMP configuration att ribute, SNMPv3 User Name 2, has changed from [snmpadmin2] to. 2016/08/20-00:06:13, [SNMP-1005], 2383,, INFO, VDX6720-1, SNMP configuration att ribute, SNMPv3 User Name 3, has changed from [snmpadmin3] to. 2016/08/20-00:06:13, [SNMP-1005], 2384,, INFO, VDX6720-1, SNMP configuration att ribute, SNMPv3 User Name 4, has changed from [snmpuser1] to. 2016/08/20-00:06:13, [SNMP-1005], 2385,, INFO, VDX6720-1, SNMP configuration att ribute, SNMPv3 User Name 5, has changed from [snmpuser2] to. 2016/08/20-00:06:13, [SNMP-1005], 2386,, INFO, VDX6720-1, SNMP configuration att ribute, SNMPv3 User Name 6, has changed from [snmpuser3] to. 2016/08/20-00:06:13, [SNMP-1005], 2387,, INFO, VDX6720-1, SNMP configuration att ribute, community string 1 , has changed from [Secret C0de] to.

2016/08/20-00:06:13, [SNMP-1005], 2388,, INFO, VDX6720-1, SNMP configuration att ribute, community string 2 , has changed from [OrigEquipMfr] to. 2016/08/20-00:06:13, [SNMP-1005], 2389,, INFO, VDX6720-1, SNMP configuration att ribute, community string 3 , has changed from [private] to. 2016/08/20-00:06:13, [SNMP-1005], 2390,, INFO, VDX6720-1, SNMP configuration att ribute, community string 4 , has changed from [public] to. 2016/08/20-00:06:13, [SNMP-1005], 2391,, INFO, VDX6720-1, SNMP configuration att ribute, community string 5 , has changed from [common] to. 2016/08/20-00:06:13, [SNMP-1005], 2392,, INFO, VDX6720-1, SNMP configuration att ribute, community string 6 , has changed from [ConvergedNetwork] to.

Fcsw(4)-dcm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-dcm: recovery stage : fcsw(4)-dcm: stage 5 : fcsw(4)-dcm: message to be delivered to component : fcsw(4)-ccm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-ccm: recovery stage : fcsw(4)-ccm: no stage 9 : fcsw(4)-dcm: Next recover (idx) stage: 10 : fcsw(4)-dcm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-dcm: recovery stage : fcsw(4)-dcm: stage 6 : fcsw(4)-dcm: message to be delivered to component : fcsw(4)-ccm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-ccm: recovery stage : fcsw(4)-ccm: no stage 10 : fcsw(4)-dcm: Next recover (idx) stage: 11 : fcsw(4)-dcm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-dcm: recovery stage : fcsw(4)-dcm: stage 7 : fcsw(4)-dcm: message to be delivered to component : fcsw(4)-ccm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-ccm: recovery stage : fcsw(4)-ccm: no stage 11 : fcsw(4)-dcm: Next recover (idx) stage: 12 : fcsw(4)-dcm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-dcm: recovery stage : fcsw(4)-dcm: stage 8 : fcsw(4)-dcm: message to be delivered to component : fcsw(4)-ccm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-ccm: recovery stage : fcsw(4)-ccm: no stage 12 : fcsw(4)-dcm: Next recover (idx) stage: 13 : fcsw(4)-dcm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-dcm: recovery stage : fcsw(4)-dcm: stage 9 : fcsw(4)-dcm: message to be delivered to component : fcsw(4)-ccm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-ccm: recovery stage : fcsw(4)-ccm: no stage 13 : fcsw(4)-dcm: Next recover (idx) stage: 14 : fcsw(4)-dcm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-dcm: recovery stage : fcsw(4)-dcm: stage 10 : fcsw(4)-dcm: message to be delivered to component : fcsw(4)-ccm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-ccm: recovery stage : fcsw(4)-ccm: no stage 14 : fcsw(4)-dcm: Next recover (idx) stage: 15 : fcsw(4)-dcm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-dcm: recovery stage : fcsw(4)-dcm: stage 1001 : fcsw(4)-dcm: message to be delivered to component : fcsw(4)-ccm: Msg input: msg = RECOVER, size = 0 : fcsw(4)-ccm: recovery stage : fcsw(4)-ccm: no stage 15 : fcsw(4)-dcm: Next recover (idx) stage: 16 All service instances on Active 2016/08/20-00:06:21, [SEC-1197], 2393,, INFO, VDX-Switch-1, Changed account admi n. 2016/08/20-00:06:22, [SEC-1197], 2394,, INFO, VDX-Switch-1, Changed account user.

DCE Blade: Callisto board version 4 2016/08/20-00:06:22, [EM-1034], 2395,, ERROR, VDX-Switch-1, PS 2 is set to fault y, rc=2000e. 2016/08/20-00:06:22, [LOG-1000], 2398,, INFO, VDX-Switch-1, Previous message has repeated 3 times. POST1: Started running Sat Aug 20 00:06:25 GMT 2016 POST1: Test #1 - Running ceeturboramtest Network OS (VDX6720-1) VDX6720-1 console login: admin Password: POST1: Script PASSED with exit status of 0 Sat Aug 20 00:06:39 GMT 201 6 took (0:0:14) WARNING: The default password of'admin' and'user' accounts have not been chang ed.

Welcome to the Brocade Network Operating System Software admin connected from 127.0.0.1 using console on VDX6720-1 VDX6720-1# POST2: Started running Sat Aug 20 00:06:41 GMT 2016 VDX6720-1# POST2: Test #1 - Running ceeportloopbacktest (SERDES) VDX6720-1# exit Network OS (VDX6720-1) VDX6720-1 console login: admin Password: WARNING: The default password of'admin' and'user' accounts have not been chang ed. Welcome to the Brocade Network Operating System Software admin connected from 127.0.0.1 using console on VDX6720-1 VDX6720-1#. Computers/Tablets & Networking::Enterprise Networking, Servers::Switches & Hubs::Network Switches.

The item "BROCADE VDX 6720 BR-VDX6720-40-F 40-PORT 1/10 GIGABIT ETHERNET NETWORK SWITCH" is in sale since Tuesday, October 04, 2016. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Switches & Hubs\Network Switches". The seller is "ocdepot" and is located in Santa Ana, California.

This item can be shipped worldwide.
Brocade VDX 6720 Br-vdx6720-40-f 40-port 1/10 Gigabit Ethernet Network Switch


Index  Sitemap  Contact Form  Privacy Policies  Service Agreement