Cisco Catalyst WS-C4948-10GE-E Switch - 10 Gigabit Ethernet uplinks. Cleaned tested and in full working order. Including 2 x Cisco X2-10GB-LRM. 4948-10GE, a low-latency, 48-port 10/100/1000, 1-rack unit (RU), fixed-configuration switch with 2 wire-speed 10 Gigabit Ethernet uplinks for rack-optimized server switching applications. The Cisco Catalyst 4948-10GE (Figure 1) offers exceptional performance and reliability for Layer 2 and Layer 3 server switching deployments for enterprise customers.The Cisco Catalyst 4948-10GE delivers wire-speed throughput with low latency for data-intensive applications using a 136-Gbps switching fabric with a 102-million packets per second (mpps) forwarding rate in hardware for Layer 2-4 traffic. High-performance switching is delivered regardless of the number of route entries or Layer 3 and 4 services enabled.
Hardware-based Cisco Express Forwarding routing architecture allows for increased scalability and performance. X2 10 Gigabit Ethernet optics provide 20 Gigabit Ethernet wire-speed uplinks for maximum throughput of traffic.Wire-speed performance for 10/100/1000 connectivity and wire-speed 10 Gigabit Ethernet uplinks. 136-Gbps switching fabric with 102-Mpps forwarding rate for Layer 2 through 4. Power-supply redundancy for nonstop operation. 1+1 redundant hot-swappable internal AC or DC power supplies. Prevention of man-in-the-middle and IP-spoofing attacks.
Secure Shell (SSH) Protocol versions 1 and 2. Simple Network Management Protocol Version 3 (SNMPv3) for secure remote access and network management.Dedicated 10/100 console port and dedicated 10/100 management port. Remote in-band management through SNMP. CISCO IOS SOFTWARE RELEASE 12.2(25)EWA SUPPORT. Per-Port, Per-VLAN Quality of Service. Per-port, per-VLAN quality of service (QoS) offers differentiated quality of services to individual VLANs on a trunk or access port. It allows service providers to rate-limit individual VLAN-based services on each trunk port to a business or a residence. Per-port, per-VLAN service policy can be separately applied to either ingress or egress traffic.
Trunk-port security extends the port security to trunk ports on a per-VLAN basis. It restricts the allowed MAC addresses or the maximum number of MAC addresses to individual VLANs on a trunk port. Trunk-port security helps service providers to block the access from a station with a different MAC address than the ones specified for that VLAN on that trunk port.When a trunk-port security violation occurs, the trunk port is either shut down, or an SNMP trap is generated. Trunk-port security is also supported on private VLAN trunk ports. 802.1x Private VLAN Assignment. The 802.1x private VLAN (PVLAN) assignment feature extends 802.1x VLAN assignment to the PVLAN environment for Layer 2 isolation.
When a port is configured as a PVLAN host port, 802.1x PVLAN assignment authorizes a user to a specified secondary PVLAN. This feature can not be enabled concurrently on a port with a voice VLAN. 802.1x Private Guest VLAN. The 802.1x private guest VLAN feature extends 802.1x guest VLAN to the PVLAN environment for Layer 2 isolation.
When a port is configured as a PVLAN host port, 802.1x private guest VLAN offers limited network access through a guest secondary PVLAN to users without a 802.1x supplicant. 802.1x RADIUS-Supplied Session Timeout. The 802.1x RADIUS-supplied timeout feature allows a switch to determine the duration of a session and the action to take when the session's timer expires. Based on the value specified by a RADIUS server, a Cisco Catalyst 4500 Series Switch can reauthenticate a host when the timer expires.
This offers a standard mechanism for periodic 802.1x reauthentication based on a configurable timer. Dynamic Host Configuration Protocol Option 82 Pass Through.
Option 82 in a Dynamic Host Configuration Protocol (DHCP) message is typically used to carry additional local information for user-access tracking. Option 82 is usually inserted or removed by an access switch or a DSL access multiplexer (DSLAM) in service provider environment. The DHCP option 82 pass-through feature helps enable the Cisco Catalyst 4900 Series to effectively transport these DHCP messages with option 82 in the aggregation layer.It can be activated through switch global configuration. Routing Information Protocol Version 2 SNMP MIB. Read-only Routing Information Protocol (RIP) Version 2 SNMP MIB extension (RFC 1724) is supported. The optional peer table is not yet provided. The item "Cisco Catalyst WS-C4948-10GE-E Switch 10 Gigabit Ethernet uplinks" is in sale since Thursday, January 3, 2019. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Switches & Hubs\Network Switches". The seller is "austech_computers" and is located in UK. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Mexico, Singapore, South Korea, Switzerland, Thailand.