Bin Last reload reason: Unknown reason cisco WS-C2960S-48TS-S (PowerPC) processor (revision G0) with 131072K bytes of memory. Processor board ID Last reset from power-on 1 Virtual Ethernet interface 1 FastEthernet interface 50 Gigabit Ethernet interfaces The password-recovery mechanism is enabled. 512K bytes of flash-simulated non-volatile configuration memory.
2960-S Series Switches are fixed-configuration Gigabit Ethernet switches (Figure 1) that provide enterprise-class Layer 2 switching for campus and branch access applications. They enable reliable and secure business operations with lower total cost of ownership through a range of innovative features including FlexStack, Power over Ethernet Plus (PoE+), and Cisco Catalyst SmartOperations. Cisco Catalyst 2960-S switches feature.24 or 48 Gigabit Ethernet ports. 1G Small Form-Factor Pluggable (SFP) or 1G/10G SFP+ slots. Cisco FlexStack stacking with 20 Gbps of stack throughput (optional). IEEE 802.3at-compliant PoE+ for up to 30W of power per port. Up to 740W of combined PoE/PoE+ budget.
USB interfaces for management and file transfers. LAN Base or LAN Lite Cisco IOS. SmartOperations tools that simplify deployment and reduce the cost of network administration. The Cisco Catalyst 2960-S Series is ideal for.
Deploying cost-effective wired connectivity in traditional desktop workspace environments. Implementing quality of service (QoS) to provide priority treatment of voice and critical business applications. Enforcing basic security policies to limit access to the network and mitigate threats. Reducing total cost of ownership through simplified operations and automation. Cisco Catalyst 2960-S Series Switches Configurations.
Cisco IOS Software Feature Set. Cisco FlexStack provides stacking of up to four 2960-S switches through an optional module (Figure 2).
The FlexStack stack module is hot-swappable and can be added to any Cisco Catalyst 2960-S switch with LAN Base software. Switches connected to a stack will automatically upgrade to the stacks Cisco IOS Software version and transparently join the stack without additional intervention. Cisco FlexStack and Cisco IOS Software provide true stacking, with all switches in a stack acting as a single switch unit.FlexStack provides a unified data plane, unified configuration, and single IP address for switch management. The advantages of true stacking include lower total cost of ownership and higher availability through simplified management and cross-stack features including EtherChannel, SPAN, and FlexLink. Note that cross-stack features must be disabled before removing the stack module from an active stack member switch.
FlexStack also allows mixed stacking: 2960-S and 2960-SF switches can be combined to provide a combination of Gigabit and Fast Ethernet ports in a single switch stack. Power over Ethernet Plus - PoE+. Cisco Catalyst 2960-S switches support both IEEE 802.3af Power over Ethernet (PoE) and IEEE 802.3at PoE+ (up to 30W per port) to deliver lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet.Wireless access points, or other standards-compliant PoE/PoE+ end devices. Table 2 shows the total PoE/PoE+ power available in each 2960-S model.
Switch PoE and PoE+ Power Capacity. Maximum Number of PoE+ (IEEE 802.3at) Ports.Maximum Number of PoE (IEEE 802.3af) Ports. 24 ports up to 30W. 48 ports up to 15.4W. 12 ports up to 30W.
24 ports up to 15.4W. The item "Cisco WS-C2960S-48TS-S Gigabit switch 2960S-48TS-S" is in sale since Thursday, June 15, 2017.This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Switches & Hubs\Network Switches".online" and is located in Salford, Greater Manchester. This item can be shipped worldwide.