HPE 5130-48G-4SFP+ EI Switch L3 Managed 48 x 10/100/1000 + 4 10 Gigabit Ethernet

HPE 5130-48G-4SFP+ EI Switch L3 Managed 48 x 10/100/1000 + 4 10 Gigabit Ethernet
HPE 5130-48G-4SFP+ EI Switch L3 Managed 48 x 10/100/1000 + 4 10 Gigabit Ethernet
HPE 5130-48G-4SFP+ EI Switch L3 Managed 48 x 10/100/1000 + 4 10 Gigabit Ethernet
HPE 5130-48G-4SFP+ EI Switch L3 Managed 48 x 10/100/1000 + 4 10 Gigabit Ethernet

HPE 5130-48G-4SFP+ EI Switch L3 Managed 48 x 10/100/1000 + 4 10 Gigabit Ethernet

HPE 5130-48G-4SFP+ EI Switch L3 Managed 48 x 10/100/1000 + 4 10 Gigabit Ethernet / 1 SFP+ rack-mountable JG934A The HP 5130 switch series is comprised of switches that support static and RIP layer 3 routing diversified services IPv6 forwarding as well provide four 10-Gigabit (10 GbE) extended interfaces. Unique Intelligent Resilient Framework (IRF) technology creates a virtual fabric by managing several one logical device which increases network resilience performance availability while reducing operational complexity. These access can be used at the edge or to connect server clusters in data centers.

High simplified management comprehensive security control policies are among key features distinguish this series. The HP 5130 EI switch series is comprised of Gigabit Ethernet switches that support static and RIP layer 3 routing, diversified services, and IPv6 forwarding, as well as provide four 10-Gigabit Ethernet (10 GbE) extended interfaces. Unique Intelligent Resilient Framework (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability, while reducing operational complexity. These switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers.

High availability, simplified management, and comprehensive security control policies are among the key features that distinguish this series. Product Overview / Box Contents.

Classifies traffic using multiple match criteria based on layer 2,3, and 4 information;applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch. Mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network.

Provides up to 48 fixed 10/100/1000BASE-T ports in a layer 2/layer 3 switch. Achieves 12 Gb/s per connection when using local CX4 stacking, allowing for up to 96 Gb/s total stacking bandwidth (full duplex) in a resilient stacking configuration.

Up to 192 Gb/s nonblocking switching fabric provides wirespeed switching with up to 143 million pps throughput. Hardware-based wirespeed access control lists (ACLs). Help provide high levels of security and ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation. Rapid Ring Protection Protocol (RRPP). Connects multiple switches in a high-performance ring using standard Ethernet technology;traffic can be rerouted around the ring in less than 50 ms, reducing the impact on traffic and applications.

Supports IEEE 802.1Q with 4,094 simultaneous VLAN IDs. Dynamic Host Configuration Protocol (DHCP).

Simplifies the management of large IP networks;supports client;DHCP Relay enables DHCP operation across subnets. Delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3.

HPE 5130-48G-4SFP+ EI - switch - 48 ports - Managed - rack-mountable. Switch - 48 ports - L3 - Managed - stackable. 48 x 10/ 100/ 1000 + 4 x 10 Gigabit Ethernet / 1 Gigabit Ethernet SFP+. Throughput:130.9 Mpps Routing/ switching capacity:176 Gbps. IPv4 routing table entries:512 IPv6 routing table entries:256. Static IPv4 routing, static IPv6 routing. SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, HTTP, HTTPS, CLI.

DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Weighted Round Robin (WRR) queuing, IPv6 support, half duplex mode, full duplex mode, sFlow, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Per-VLAN Spanning Tree Plus (PVST+), Device Link Detection Protocol (DLDP) support, Rapid Ring Protection Protocol (RRPP) support, Endpoint Admission Defense (EAD), STP Root Guard, LLDP support, DHCP relay, Port Security, dynamic ARP protection, DHCP protection, Strict Priority Queuing (SPQ), port isolation, tagged VLAN, Generic Attribute Registration Protocol (GARP), Intelligent Resilient Framework Technology (IRF). IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP). 44 cm x 26 cm x 4.36 cm. RADIUS, TACACS+, Secure Shell v. 48 x 1000Base-T - RJ-45 4 x Gigabit / 10Gbit LAN - SFP+ 1 x console - RJ-45 - management.

FCC Class A certified, CISPR 22 Class A, CISPR 24, NOM, EN55024, EMC, RoHS, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, WEEE, ANATEL, FDA, EN 60825-1, EN 61000-4-29, CAN/ CSA C22.2 No. 60950-1, ANSI C63.4-2009, VCCI V-3 Class A ITE, EN 61000-3-3:2008, VCCI V-4, EN 61000-3-2:2006+A1:2009+A2:2009, EN 300386, EN 61000-4-4:2012, EN 61000-4-5:2006, EN 61000-4-6:2009, EN 61000-4-11:2004, EN 300 386 V1.6.1, EN55022:2010 Class A, IEC 61000-4-3:2006.

The item "HPE 5130-48G-4SFP+ EI Switch L3 Managed 48 x 10/100/1000 + 4 10 Gigabit Ethernet" is in sale since Sunday, August 14, 2016. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Switches & Hubs\Network Switches". The seller is "zippytom_store" and is located in London. This item can be shipped to United Kingdom.
HPE 5130-48G-4SFP+ EI Switch L3 Managed 48 x 10/100/1000 + 4 10 Gigabit Ethernet


Index  Sitemap  Contact Form  Privacy Policies  Service Agreement