HPE E3800 48-Port PoE+ 4x 10GbE SFP+ L3 Gigabit Ethernet Switch Stacking Module

HPE E3800 48-Port PoE+ 4x 10GbE SFP+ L3 Gigabit Ethernet Switch Stacking Module
HPE E3800 48-Port PoE+ 4x 10GbE SFP+ L3 Gigabit Ethernet Switch Stacking Module
HPE E3800 48-Port PoE+ 4x 10GbE SFP+ L3 Gigabit Ethernet Switch Stacking Module
HPE E3800 48-Port PoE+ 4x 10GbE SFP+ L3 Gigabit Ethernet Switch Stacking Module
HPE E3800 48-Port PoE+ 4x 10GbE SFP+ L3 Gigabit Ethernet Switch Stacking Module
HPE E3800 48-Port PoE+ 4x 10GbE SFP+ L3 Gigabit Ethernet Switch Stacking Module
HPE E3800 48-Port PoE+ 4x 10GbE SFP+ L3 Gigabit Ethernet Switch Stacking Module
HPE E3800 48-Port PoE+ 4x 10GbE SFP+ L3 Gigabit Ethernet Switch Stacking Module
HPE E3800 48-Port PoE+ 4x 10GbE SFP+ L3 Gigabit Ethernet Switch Stacking Module

HPE E3800 48-Port PoE+ 4x 10GbE SFP+ L3 Gigabit Ethernet Switch Stacking Module

HP Aruba E3800 48G-4SFP+ 48 Port Gigabit Managed Switch HP PN: J9574A. Condition: Used, tested - all ports OK. Dual Power Supplies - 2 x 1000w.

Stacking Module - 4-Port - J9577A. Fully managed L3 stackable switch series. SFP+, 10GBASE-T, PoE+, and modular stacking. Highly resilient meshed stacking technology. Switch - 48 ports - L3 - Managed - stackable.

48 x 10/100/1000 (PoE) + 4 x 10 Gigabit Ethernet / 1 Gigabit Ethernet SFP+. Throughput: 130.9 Mpps ¦ Switching capacity: 176 Gbps. OSPF, RIP-1, RIP-2, IGMP, VRRP, OSPFv2, PIM-SM, static IP routing, PIM-DM, OSPFv3, MLDv2, MLD. SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTPS, HTTPS, CLI. Flow control, Layer 2 switching, DHCP support, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DiffServ support, IPv6 support, sFlow, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), MLD snooping, STP Root Guard, Uni-Directional Link Detection (UDLD), fan tray, MAC address lockout.

IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1v, IEEE 802.3an, IEEE 802.3at. Ports: 48 x 10/100/1000 (PoE) + 4 x 10 Gigabit Ethernet / 1 Gigabit Ethernet SFP+. 19 inch Rackmountable: Rackmounts Included. Modules: HP (J9577A) E3800 4-Port Stacking Module. Power Supply: 2 x Power Supplies.

Allows assignment of descriptive names to ports. IEEE 802.1AB Link Layer Discovery Protocol.

(LLDP) advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications. Leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; an audit trail documents activity. (UDLD) monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional link into a unidirectional one; this prevents network problems such as loops. Provides independent primary and secondary operating system files for backup while upgrading. Enables management over a separate physical management network; and keeps management traffic segmented from network data traffic. Bridges the experience of Hewlett Packard Enterprise Comware CLI users who are using the ProVision CLI. Display and fundamental Comware CLI commands. Are natively embedded in the switch CLI; display output is formatted as on Comware-based switches; fundamental commands provide Comware-familiar initial switch setup. When Comware commands are entered, CLI help is elicited to formulate the correct ProVision software CLI command.

On Gigabit Ethernet and 10-Gigabit Ethernet ports, jumbo frames allow high-performance remote backup and disaster- recovery services. Provides up to 30 W per port to IEEE 802.3at-complaint PoE/PoE+-powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/zoom/tilt security cameras. Detects and provides power to pre-standard PoE devices refer to the list of supported devices in the product FAQs, which can be accessed at.

Provide fiber-optic (up to 70 km) or direct-attach-cable (DAC) connectivity. Offer 10GbE speeds, using standard RJ-45 connectors and standard twisted-pair. Cabling up to 100 m. Provides automatic adjustments for straight-through or crossover cables on all RJ-45 ports. Enables switch management in an IPv6 network.

Dual stack (IPv4 and IPv6). Transitions IPv4 to IPv6, supporting connectivity for both protocols. Forwards IPv6 multicast traffic to the appropriate interface.

Supports ACL and QoS for IPv6 traffic. Supports static, RIPng, OSPFv3 routing protocols. Supports encapsulation of IPv6 traffic in IPv4 packets. Provides RA guard, DHCPv6 protection, dynamic IPv6 lockdown, and ND snooping. Allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications. 80 PLUS Silver Certified power supply. Increases power efficiency and savings. Reduces power consumption in accordance with IEEE 802.3az. Provides up to 336 Gb/s of stacking throughput; each 4-port stacking module can. Support up to 42 Gb/s in each direction per stacking port.

Ring, chain, and mesh topologies. Support up to a 10-member ring or chain and 5-member fully meshed stacks.

Meshed topologies offer increased resiliency vs. Provides simplified management as the switches appear as a single chassis when stacked. Hewlett Packard Enterprise ProVision ASIC architecture. Is designed with the latest ProVision ASIC, providing very low latency, increased packet buffering, and adaptive power consumption.

Virtual Router Redundancy Protocol (VRRP). Allows groups of two routers to dynamically back each other up to create highly available routed environments in IPv4 and IPv6 networks. Defines an address in Routing Information Protocol (RIP) and Open Standard Path First (OSPF), improving diagnostic capability.

Provide more control during route redistribution; allow filtering and altering of route metrics. User Datagram Protocol (UDP) helper function. Allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses; and helps prevent server spoofing for UDP services such as DHCP. Centralizes and reduces the cost of IPv4 address management. Provides manually configured routing for both IPv4 and IPv6 networks. In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For more information visit Australian Consumer Law's website. Damaged or missing packaging, missing or damaged parts. The item "HPE E3800 48-Port PoE+ 4x 10GbE SFP+ L3 Gigabit Ethernet Switch Stacking Module" is in sale since Wednesday, June 24, 2020. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Switches & Hubs\Network Switches". The seller is "klearview_au" and is located in Dundas, NSW. This item can be shipped worldwide.
HPE E3800 48-Port PoE+ 4x 10GbE SFP+ L3 Gigabit Ethernet Switch Stacking Module


Index  Sitemap  Contact Form  Privacy Policies  Service Agreement