NETGEAR GS408EPP ProSafe+ Easy-Mount 8-Port Gigabit Ethernet Web Managed Switch

NETGEAR GS408EPP ProSafe+ Easy-Mount 8-Port Gigabit Ethernet Web Managed Switch

NETGEAR GS408EPP ProSafe+ Easy-Mount 8-Port Gigabit Ethernet Web Managed Switch

NETGEAR GS408EPP ProSafe+ 8-port Gigabit Web Managed Easy-Mount Switch w/8-port PoE/PoE+. Easy-Mount Switch allows you to put more PoE/PoE+ ports Virtually Anywhere. With its unique mounting system.

The Easy-Mount Switch family comes with a full set of software features such as traffic prioritization, VLANs, QoS and PoE power allocation. Moreover the Easy-Mount switches comes with Energy Efficient Ethernet for maximum power savings. Easy-Mount and Low Noise Operation. Deploy your PoE/PoE+ switch closest to your PoE/PoE+ devices and put your PoE/PoE+ ports exactly where you need them.

Install your ports up in the ceiling, strapped to a pole, mounted under a desk or tabletop. If you wish you also can rack mount the GS408EPP switch on a 19-inch standard rack. You can even rack mount 2 GS408EPP switches back to back in a single 1U. Thanks to the active fans the GS408EPP is a silent switch, well below offices ambient background noise.

Power-Over-Ethernet (PoE) option available for powering IP Security Cameras, VOIP phones, wireless access points, and other PD-powered devices. With eight (8) PoE/PoE+ Gigabit Ethernet ports (802.3af, 802.3at) providing up to 30W per port, and a power budget of 124W, provide power and connectivity across one wire to power-hungry PoE devices like 802.11ac Wave 2 Access Points, Pan/Tilt/Zoom/HD Security Cameras, security door locks, and other IoT devices. Easy-Mount "Virtually Anywhere" Mounting System.

The innovative mounting system gives you the flexibility to place the Easy-Mount Switch in locations where other switches will not go. Whether it's directly on a wall, strapped to a pole, under the meeting table in a conference room or in a server closet, vertical or horizontal, flat or perpendicular, the unique mounting system allow you to control exactly how and where your ports and cables are deployed.

The Easy-Mount Switches can go beyond plug-and-play connectivity with additional ProSAFE Switch networking features, allowing businesses to segment the network with VLANs or prioritize voice and video traffic with QoS. Easy-Mount switches are backed by a NETGEAR ProSAFE. With eight (8) PoE/PoE+ Gigabit Ethernet ports (802.3at) providing up to 30W per port, and a power budget of 124W, provide power and connectivity across one wire to power-hungry PoE devices like 802.11ac Wave 2 Access Points, Pan/Tilt/Zoom/HD Security Cameras, security door locks, and other IoT devices. The industry-first Easy-Mount mounting system allows you to put your PoE+ ports exactly where you want them: on a wall, under a tabletop/desktop, on a pole, or even up in the ceiling on the ventilation ducts, horizontal or vertical.

Because all connections are on the front (both power and ethernet connections), and because of it's small size, you can mount two GS408EPP Easy-Mount switches within a single 1U slot by mounting one facing out the front, and the other facing out the back of your rack. Ingress and egress rate limiting allows for bandwidth shaping for mitigating network resources constraints or for optimizing guest access bandwidth on the network.

Port-based or 802.1p-based prioritization. Port-based ingress and egress rate limiting. For improved network efficiency on delivering multicast traffic. Save cost and improve network efficiency by ensuring multicast traffic only reaches designated receivers without the need of an extra multicast router.

Loop Detection / Auto DoS Prevention. Detect accidental network loops and protect against DoS (Denial of Service) attacks.

Port-based & 802.1Q-based VLANs. Segment network into smaller groups for more secure and efficient use of network resources. Advanced per port PoE controls for remote power management of PoE connected devices eg. Wireless AP, IP security cameras, LED lighting, door locks, IoT devices including. Enable/disable PoE power per port. PoE power class configuration (802.3af, 802.3at). User-defined PoE power limit per port (override detected Class). Power cycle PoE per port.

Port Trunking / Link Aggregation (LAG). Build up bigger bandwidth to support aggregated uplink/downlink traffic. Energy Efficient Ethernet (IEEE 802.3az). For maximum power savings and reduced energy costs. For better and quicker network diagnostics and troubleshooting.

Easily identify bad Ethernet cables. Telephone: +61 1300 800 522. Device Deal ships orders by Local & international couriers, including Australia post, Fast way couriers, DHL, TNT. How long will it take to my area? The Processing Time is the time of gathering up all the items and packaging. The item "NETGEAR GS408EPP ProSafe+ Easy-Mount 8-Port Gigabit Ethernet Web Managed Switch" is in sale since Wednesday, February 22, 2017. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Switches & Hubs\Network Switches". The seller is "device-deal" and is located in Melbnourne, Victoria. This item can be shipped worldwide.


NETGEAR GS408EPP ProSafe+ Easy-Mount 8-Port Gigabit Ethernet Web Managed Switch


Index  Sitemap  Contact Form  Privacy Policies  Service Agreement